Home / News / 3Shape Model Builder: What It Does for Dental Labs, and What to Send When You Outsource Model Design
News

3Shape Model Builder: What It Does for Dental Labs, and What to Send When You Outsource Model Design

If your lab prints models from digital scans, 3Shape Model Builder is the part of Dental System that designs them. This post covers what Model Builder does, based on 3Shape's own pages, what it changes for a lab, and what to put on the ticket when you outsource model design.

It is written for lab owners and CAD/CAM technicians. It covers software features and files between labs and design services, not clinical decisions. Menu names and steps can differ by software version, so check 3Shape's support page for your version.

What 3Shape Model Builder does

  • Part of Dental System. Model Builder is a module of 3Shape Dental System, 3Shape's design software for labs. It appears in the package list on 3Shape's Dental System page. Packages differ, so compare them in 3Shape's brochure or with your reseller.
  • Models from scans. 3Shape describes Model Builder as a tool for designing digital lab models for a wide range of indications, including implant models. It works from TRIOS scans, other intraoral scans and scans of impressions or stone models. 3Shape says the design files are ready for manufacturing on model-making machines (About 3Shape Model Builder, 2012).
  • Scans from other scanners. Building models from other intraoral or lab scanners' files can need an extra license module. It depends on your Dental System version and the scan type (licensing requirements).
  • Same order as the restoration. You open the order in Model Builder after the restoration design is done in Dental Designer (opening an order in Model Builder).
  • Dies. Model Builder generates dies in its sectioning step, from a cutout line transferred from Dental Designer. If the line does not come across, 3Shape's workaround is to click the tooth to set the margin line, then correct the generated cutout line if needed (sectioning step).
  • Virtual Trimming preferences. These settings include pin type, hollowing and friction bars, and they are applied when dies are generated (Dental System release notes). They can also be set for each material in the Dental System Control Panel, under Digital Model → Digital Model Design. Changes there apply to new orders (Virtual Trimming settings).
  • Hollow or solid. Model Builder can hollow a model to reduce material use. You set the surface thickness under File → Virtual Trimming Preferences → Model Manufacture → Hollowing (hollowing models). 3Shape lists several variants: a solid model, hollow models with an open bottom, with or without a bottom grid, and a model with an internal hole. The Use variable thickness and Bottom drain hole size settings choose between them (hollowing variants).
  • Implant models. Instead of a die, Model Builder can generate an abutment analog interface. The implant system's abutment kit must contain an Analog Interface Model entry. You check it in the Dental System Control Panel under Abutments → Implant Systems. If the field is empty, Model Builder cannot generate that model (analog interface). Dental System 25.3.0 added a tool to select analog interfaces, and an abutment kit can be set up with more than one interface model (release notes).
  • Articulator Interface step. The Model Builder workflow includes an Articulator Interface step, where the design models and dies are shown (Articulator Interface step).
  • Model Builder Express. In 2024, 3Shape announced Model Builder Express, a completely new app for labs. It enables standalone dies and automates many workflow steps. The AI generates a model proposal that you inspect and correct only if needed. For availability in your region, 3Shape points to its own team or your reseller (3Shape, 2024).
  • Not the same as Model Maker. 3Shape Model Maker is a separate app. It runs from the 3Shape Unite platform and turns TRIOS scans into models, and 3Shape says it is intended for use in clinics (Model Maker updates).

What it changes for a lab

  • A printable model from a digital case. A case that arrives as an intraoral scan has no stone model. Model Builder designs the model from the scan, and your lab prints it.
  • One order, one set of scans. The model is built in the same order as the restoration, from the same scans and the cutout line set in Dental Designer.
  • Defaults for each material. Virtual Trimming values saved for a material in the Control Panel apply to new orders. Pin type, hollowing and friction bars start from your lab's values.
  • Less resin in each model. 3Shape describes hollowing as a way to reduce material consumption in manufacturing.
  • Implant models tied to the implant library. The analog interface comes from the abutment kit of the implant system in the order. If the kit has no Analog Interface Model entry, the model cannot be built with an analog interface.
  • Scan quality still matters. 3Shape links several Model Builder errors to the scan: holes in the mesh, scan artifacts and poorly trimmed edges. Its fix starts by going back to the prepare step to trim and smooth the scan (Model Builder scan errors).

Outsourcing model design: what to send

SubDesignCenter designs print-ready model bases for dies, implant models and quality-control workflows in 3Shape. If your lab works in Model Builder, you can write your ticket in the same terms.

  1. Get in touch first. Reach us through the contact section on our site. Labs on 3Shape Communicate can send that way (see our Communicate case sharing guide). Otherwise, we set up a case exchange that fits your lab when we start working together.
  2. Send the scans and a ticket. Scans can come from any intraoral or desktop scanner as STL, PLY or OBJ files. The ticket names the model type and your printer. Put the patient's first name and your lab's case number on it, and leave out last names, dates of birth and contact details.
  3. Write your settings in Model Builder terms. If your lab has set values, note the die layout (one piece, separated dies, or one piece with separate dies), pin type, friction bars, hollow or solid, surface thickness and drain holes. SubDesignCenter designs the model to the values on your ticket.
  4. Implant models. Name the implant system. For intraoral scans, choose a model designed for a digital lab analog and name the analog, or choose a one-piece model. SubDesignCenter works from the implant libraries available in 3Shape.
  5. Put your Dental System version on the ticket. You receive the editable 3Shape design files plus a print-ready model file for your printer. Whether you can open and edit the design files can depend on your Dental System version.
  6. Review and approve. Every case goes through a review step before delivery. Request refinements and we adjust. A case is not finished until your lab approves it. A 3D preview link is an optional add-on, available on request, for checking a design in a web viewer on a phone or PC.
  7. Know the turnaround. Standard turnaround is 2 business days. Cases you send in your evening are designed during our working day in Korea, so work starts while your lab is closed.

Need a ticket template? Our free dental lab Rx form runs in your browser and saves as a PDF. For the full ticket list by model type and the checks for the first print, see our dental model base design outsourcing guide. Our model and base design page lists what to send.

Try it on three cases

New labs can send SubDesignCenter three free test cases: crowns, or bridges of up to 3 units, including implant bridges. Model design is not part of the free test; ask for it separately. To plan the test, see how to run three free test cases.

Checklist

  • Dental System version and modules confirmed: Model Builder or Model Builder Express
  • License module checked for scans from other scanners
  • Implant models: Analog Interface Model entry checked in the abutment kit
  • Virtual Trimming defaults saved for each material in the Control Panel
  • Hollowing variant chosen: solid, open bottom, bottom grid or internal hole
  • Scans trimmed and smoothed before the model step
  • Outsourcing: STL, PLY or OBJ scans with a ticket naming the model type and printer
  • Outsourcing: die layout, pin type, friction bars and hollowing noted if your lab has set values
  • Outsourcing: Dental System version on the ticket, and patient first name and lab case number only

If you have questions about your workflow, reach us through the contact section on our site.

Questions

What does 3Shape Model Builder do?

Model Builder is the Dental System module for designing digital lab models from scans. 3Shape describes it as covering a wide range of indications, including implant models. It generates dies in a sectioning step, can hollow models, and can build an abutment analog interface instead of a die.

Is Model Builder the same as Model Maker or Model Builder Express?

No. Model Maker is a separate app on the 3Shape Unite platform, and 3Shape says it is intended for use in clinics. Model Builder Express is a lab app that 3Shape announced in 2024 as completely new. In Express, the AI proposes a model that you inspect and correct only if needed.

Do I need Model Builder to outsource model design?

SubDesignCenter returns a print-ready model file, prepared for your printer. You load it into your printer software, so you do not need a Model Builder license to print it. You also receive the editable 3Shape design files. Whether you can open and edit them can depend on your Dental System version.

3Shape, 3Shape Model Builder, Model Builder Express, 3Shape Model Maker, Dental System, Dental Designer, 3Shape Unite, 3Shape Communicate and TRIOS are trademarks of 3Shape A/S. SubDesignCenter is an independent design service and is not endorsed by 3Shape A/S.

Send a test case.

Your first three test cases (crowns, or bridges of up to 3 units, including implant bridges) are free. Tell us how your lab works and we'll set up a case exchange that fits it.

Start a case consultation →