Home / News / 3Shape Crown Design Outsourcing: How to Run Three Free Test Cases
News

3Shape Crown Design Outsourcing: How to Run Three Free Test Cases

Before you move crown and bridge work to a new design partner, run a small test. Every lab has its own design preferences, its own mill or printer and its own way of writing a ticket. Three real cases show how a partner reads your tickets, follows your preferences and handles a refinement. This guide covers how to set up a three-case test for 3Shape crown design outsourcing: what to agree first, which cases to pick, what to check in the designs you get back, and what to decide afterward.

It is written for lab owners and CAD/CAM technicians. It covers files and communication between labs and design services, not clinical decisions.

Step 1: Agree on your design preferences before the first case

These points also appear in our earlier post on how to send 3Shape design cases to an outsourcing partner. They are repeated here because the test depends on them.

  • Design preferences. Cement gap, contact strength, occlusal clearance and minimum thickness. Send them once, before the first case. SubDesignCenter keeps them on file and applies them to your lab's cases.
  • Material. Name the material on every ticket. Designs are prepared for the material named on the ticket.
  • Mill or printer. Name it, so the file is prepared for your workflow.
  • The file you get back. SubDesignCenter returns a production-ready design file, prepared for your mill or printer. If your CAM or printer software needs a specific file type, note it on the ticket.
  • Scans. For crowns and bridges, send the prep, opposing and bite scans. SubDesignCenter accepts scans from any intraoral or desktop scanner as STL, PLY or OBJ files.
  • Case exchange. Labs on 3Shape Communicate can send that way. Otherwise, we set up a case exchange that fits your lab when we start working together.
  • Patient information. The patient's first name and your lab's case number are all SubDesignCenter needs. Leave out last names, dates of birth and contact details.

Need a ticket template? Our free dental lab Rx form runs in your browser and saves as a PDF.

Step 2: Pick three cases that look like your everyday work

New labs can send SubDesignCenter three free test cases: crowns, or bridges of up to 3 units, including implant bridges. Choose cases that show how your normal work would come back:

  1. A single crown in a material you use often. It shows how your everyday preferences come back.
  2. A bridge of up to 3 units. It shows how several units are designed together.
  3. A case with a note you often write on tickets. For example, limited space or a contour to match. It shows how a written note is read.

You can mix crowns and a bridge in the three cases. Each bridge counts as one case.

A few more points:

  • Complete scans. Pick cases with the full scan set. A missing scan tests the hand-off, not the design.
  • A normal schedule. Pick cases on your usual schedule, so you see how the standard 2 business days fit your week.
  • Close together. Send the three cases within a short period, so you check them under the same conditions.
  • Ticket copies. Keep a copy of each ticket, so you can compare each design with what you asked for.

Step 3: Check each design against the same list

These are production checks in your lab, not clinical decisions.

  • Margin. Check that the margin follows the prep line on the scan all the way around.
  • Contacts. Check contact strength against the preference you sent.
  • Occlusion. Check occlusal clearance against your preference, using the opposing and bite scans.
  • Contour. Check that the anatomy and contour match the shape your lab usually delivers.
  • Minimum thickness. Check the design against the minimum thickness you set for that material.
  • Production. Load the file into your mill or printer workflow. Check that it runs without extra conversion.
  • Response to refinements. If a design needs a change, request a refinement. Note whether the adjusted design reflects your request.
  • Turnaround. Note when each case came back. At SubDesignCenter, the standard turnaround for crown and bridge design is 2 business days. SubDesignCenter works on Korean time, so cases that labs in the Americas and Europe send in their evening are designed while the lab is closed.

At SubDesignCenter, every case goes through a review step before delivery, and a case is not finished until your lab approves it. Every case also includes a conversation with the designer about material choice, design decisions and how the design will mill or print. Use that conversation on at least one test case.

Step 4: Decide what comes next

  • Which cases to keep sending. Decide whether to start with single crowns or to send bridges and full-contour restorations as well. SubDesignCenter designs single crowns, multi-unit bridges and full-contour restorations in 3Shape.
  • Which preferences to adjust. If contacts or clearance came back different from what you want, send the adjusted values once. SubDesignCenter keeps them on file and applies them to your lab's cases.
  • How to exchange cases. Choose 3Shape Communicate or the case exchange set up for your lab. Agree on one channel for questions and approvals, too.
  • Write down the results. Use the same list for the cases that follow.

Three-case test checklist

  • Design preferences sent once (cement gap, contact strength, occlusal clearance, minimum thickness) and confirmed on file
  • Material, mill or printer, and any file type you need noted on the ticket
  • Prep, opposing and bite scans as STL, PLY or OBJ files
  • Patient first name and lab case number only, and file names checked
  • Three test cases: crowns, or bridges of up to 3 units, including implant bridges
  • Each case has a full scan set and a normal schedule
  • Checked: margin, contacts, occlusion, contour, minimum thickness
  • Checked: the file runs in your mill or printer workflow without extra conversion
  • Checked: refinements reflected, and the date each case came back
  • Decided: cases to keep sending, preference changes, case exchange

Related reading

Ready to run the test?

To set up your three test cases, reach us through the contact section on our site.

Questions

What are the conditions for the free test cases?

New labs can send SubDesignCenter three free test cases: crowns, or bridges of up to 3 units, including implant bridges.

What should I send before the test?

Send your design preferences once: contact strength, occlusal clearance, cement gap and minimum thickness. With each case, send the prep, opposing and bite scans and a work ticket that names the material. Scans can come from any intraoral or desktop scanner as STL, PLY or OBJ files.

How long does crown and bridge design take?

At SubDesignCenter, the standard turnaround for crown and bridge design is 2 business days. Cases that labs in the Americas and Europe send in their evening are designed during the Korean working day, while the lab is closed.

3Shape and 3Shape Communicate are trademarks of 3Shape A/S and are mentioned for factual reference only. SubDesignCenter is an independent design service and is not endorsed by 3Shape A/S.

Send a test case.

Your first three test cases (crowns, or bridges of up to 3 units, including implant bridges) are free. Tell us how your lab works and we'll set up a case exchange that fits it.

Start a case consultation →